[gschroeder]

pjmoreland, VetteVet, thank you for your advice. I checked the fuse panel, and the 3 amp cluster feed fuse was blown. I replaced it, but still no idiot brake and/or idiot temp light working. I tried manually grounding the brown brake wire at the master cylinder, but could not get the light to illuminate. FYI, I checked the light bulbs again, and both do work. I put the lights in a different socket, and both illuminated just fine.

I also checked the ignition switch, and there are not 2 green wires running to it. I attached a pic of ignition wiring. There is red, purple, pink brown (large), and 2 small brown wires. No green. I'm not sure if I mentioned this earlier, or if it matters, I do have the factory deluxe CST10 dash with all gauges and tach.

Any suggestions on what to trouble shoot next? Thanks again for all your help.

Thank you