|
Re: '67-'72 Power Brake Booster Bracket With Hydraulic Clutch Conversion
On the willwood master I am using a 3/8 to -3an adapter. Then running a -3an line to the slave.
Quote:
Originally Posted by 72c5
Hi hinz28-
Thanks for posting the clear pics of your install.
John just shipped me a kit on Fri.
What is the fitting size on the Willwood master? 1/8 NPT? 4AN?
I'm doing a set up with a NV3500, which has the GM quick disconnect fitting on the internal slave. I'm having a tough time finding a generic hose with the GM quick disconnect on one end with either 1/8 NPT or 4AN on the other end.
Any suggestion for a reasonably priced generic hose which would connect the clutch master to the GM fitting internal slave?
All the aftermarket hoses which have a GM quick connect on the slave end, have the GM roll pin fitting on the MC end.
Posted via Mobile Device
|
__________________
1970 Chevrolet C10 SWB 6.0 LSx
1971 Chevrolet K10/30 5.3 LSx
1972 K5 Blazer 8 lug LSX
|