View Single Post
Old 03-04-2007, 11:38 PM   #4
Rokcrln
Senior Member
 
Rokcrln's Avatar
 
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
Re: LFD's low buck truck build!

Now repeat and remove the next section of bed that can be tossed in the garbage. Next you will need to layout the new marks on the frame for the bumper bolts, bed mount and the new end of the frame. Drill out all these holes to the proper size and then cut off the end of the frame and get it out of your way. I used some pieces of angle and a few clamps to hold the bed end in place while I put the bed bolts back in place. But first I took a small grinder and just removed the paint off the edges with out removing any metal.

Kevin
LFD Inc.
Attached Images
     
Rokcrln is offline