The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Axle · 06-16-2019, 04:39 PM

Brazed up the sides of the hole in mine and re-tapped it for the stock pin, figured if that failed the oversize pin will be plan B.

06-16-2019, 04:39 PM	#6
Axle Registered User Join Date: Jul 2011 Location: SW Ontario Posts: 1,199	Re: 1/2 ton caliper pin bolt Brazed up the sides of the hole in mine and re-tapped it for the stock pin, figured if that failed the oversize pin will be plan B.