Re: Help with driveline angles...
When you list the trans angle as 'down' & the shaft angles as 'up', are you stating they are opposite of each other:
Front of trans is higher than the tailshaft = down
Front of 1st shaft is lower than the rear of the shaft = up
Is the pinion centerline higher or lower than the trans output @ ride height?
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|