|
Re: Help with driveline angles...
Quote:
Originally Posted by ChadW
Yes..you are correct..
Pinion center line is Higher than the trans output shaft at ride height..
i did receive an message back from Nate at porterbuilt and we adjusted my pinion to 0 and he says that all are good now...Im just trying to figure out exactly what that means...lol
trans is 4.0 down
1st shaft is 0.31 UP
second shaft is 2.26 UP
Pinion is 0
Tks
|
Nate & I have had multiple discussions about these "severe" set-ups. I would start where you're at & see how things work. Give yourself room for adjustment & the possible addition of the double-cardan style joint set-up if needed if you can't get things vibration free.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|