The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FirstGen · 05-13-2004, 08:32 PM

Vince,
Since you have been through this before, tell me if I am on the right track or not. I have a 2001 5.3 with everything and harness/PCM. So I find the schematics for the PCM outs and wire accordingly (grounds, all time hot, accessory) then I remove the rear O2s, the EGR, and the VATS on the harness? What do I do to remove them just cut it out or what? After that I send out the PCM to be 'tuned' and they remove the mentioned stuff from the PCM and along with whatever trans stuff I decide to do and I'm good to go electrically. Now will a standard radiator work or is there something different with the reverse coolant motors that need a different radiator? I have an electric fan. The motor mounts I think I can fab. The exhaust shouldn't be any big deal. Now the fuel, what did you do for the fuel system? Any tips here? I think that about covers it.

Thanks for your help,
Taylor

05-13-2004, 08:32 PM	#25
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Vince, Since you have been through this before, tell me if I am on the right track or not. I have a 2001 5.3 with everything and harness/PCM. So I find the schematics for the PCM outs and wire accordingly (grounds, all time hot, accessory) then I remove the rear O2s, the EGR, and the VATS on the harness? What do I do to remove them just cut it out or what? After that I send out the PCM to be 'tuned' and they remove the mentioned stuff from the PCM and along with whatever trans stuff I decide to do and I'm good to go electrically. Now will a standard radiator work or is there something different with the reverse coolant motors that need a different radiator? I have an electric fan. The motor mounts I think I can fab. The exhaust shouldn't be any big deal. Now the fuel, what did you do for the fuel system? Any tips here? I think that about covers it. Thanks for your help, Taylor __________________ 1968 C10 build in process TT LSA/6L90e/9"