Quote:
Originally Posted by moose1008
Hey guys hope everybody has had a great holiday. I have been busy with family and haven't been able to work on the truck much. But I was able to break away a little today and have come across some thing I need some advice on. I have one of my porterbuilt notches fitted to the frame loosely bolted working off a plumbob and center line. I am on the other side and have done the same thing and before I drilled and bolted I took some measurements off the front and back of the notch to the rear of the frame and I am 3/16's off from one to the other but dead on my center line?? Any suggestions...
|
Check out Rusbuilt's "Darcy" build thread. He had the same issue. As long as your rearend isn't making contact with the notch you should be fine. I only say that because of the various post I have read that mention the same issue your having with your notch.