Re: Tilt column turn signal switch question
I rebuilt 3 of these about 2-3 years ago and the exact details are a bit lost among all the other tasks associated with restoring my truck. My rebuilds required complete teardowns.
With that in mind...
- I don't see how you can get the wires fished through the shift bowl unless you remove it or the wires from the connector.
- I am almost certain the switch housing needs to be removed. I made my own puller out of some scrap stuff from other projects. Some have said it can be removed by tapping it off with a screwdriver which could cause damage. Either way there may be rust holding the housing on. Penetrating oil may be you friend. Tapping the circumference of the collar/housing with a rubber mallet may also help.
Jim
Last edited by FirstOwner69; 09-06-2016 at 11:21 PM.
|