The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**richard2717** · 05-07-2016, 04:52 PM

So... I bought another blazer floor to help to out with getting the green blazer back together. It has some rust in the floor but all of the cross sills are in real good shape. I had a pc. of floor section here that I got from Warbucket some time back and decided to get started on getting it repaired. The good thing is the underside of this floor must have been undercoated from factory/dealer/new which is what saved it a bunch from rotting out. First picture is what floor looked like when I got it

Name: KIMG2305.jpg
Views: 782
Size: 54.3 KB

Name: KIMG2305.jpg
Views: 782
Size: 54.3 KB

The other four pictures are closer up of the rust

Name: IMG_20160507_092419866.jpg
Views: 742
Size: 48.9 KB

Name: IMG_20160507_092428515.jpg
Views: 806
Size: 48.3 KB

The pc. of floor I had is actually from the front of another floor and the stamping does not end like the rear does so it will need to be cut and modified to match. On the front of the floor the ribs stop short of the end, on the rear they taper flush to the end.

Name: IMG_20160507_092454799_HDR.jpg
Views: 733
Size: 56.4 KB

Name: IMG_20160507_092454799_HDR.jpg
Views: 733
Size: 56.4 KB

Name: IMG_20160507_092443200.jpg
Views: 747
Size: 58.1 KB

05-07-2016, 04:52 PM	#115
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: 71' Blazer Rust bucket build So... I bought another blazer floor to help to out with getting the green blazer back together. It has some rust in the floor but all of the cross sills are in real good shape. I had a pc. of floor section here that I got from Warbucket some time back and decided to get started on getting it repaired. The good thing is the underside of this floor must have been undercoated from factory/dealer/new which is what saved it a bunch from rotting out. First picture is what floor looked like when I got it The other four pictures are closer up of the rust The pc. of floor I had is actually from the front of another floor and the stamping does not end like the rear does so it will need to be cut and modified to match. On the front of the floor the ribs stop short of the end, on the rear they taper flush to the end. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.