|
Re: 5.7 LS1 into a 66
The stock plastic power steering pump pulley was damaged and replaced with dorman 300-202 which is metal. I tried to modify the stock pressure hose with the use of compression fittings but air was getting sucked in somewhere so I just replaced the whole thing. Metric to adapters were required to keep my gear box. Russel 648060, -6 AN, 16mm x 1.5 O-ring was used at the pump and Russel 648050, 6 To 11/16"-18 Inverted Flare at the gear box. Had a local shop make the hose with two -6AN 90 degree turned to opposite directions. Retained the old return line. $40 for the hose.
|