The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 01-26-2014, 11:58 PM

Here are some of the scan gauge. I took these right before I left for work.
Dash lights on.

Scan gauge lite up. I took the ash tray out and just stuck it in the opening for now. I want to try and make it slide in and out if I can. If you have suggestions LMK. I may just use the double sided tape on the front of the ashtray but would rather not.

Everything turned off.

01-26-2014, 11:58 PM	#103
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 2003 LSx swap thread...here we go Here are some of the scan gauge. I took these right before I left for work. Dash lights on. Scan gauge lite up. I took the ash tray out and just stuck it in the opening for now. I want to try and make it slide in and out if I can. If you have suggestions LMK. I may just use the double sided tape on the front of the ashtray but would rather not. Everything turned off. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.