Quote:
Originally Posted by 05crewcab
The diagram is correct.
Run a new 12ga wire from the ignition unfused terminal on the fuse block to the BAT terminal on the HEI (red wire above).
Then, there is a solid purple wire to your starter from the fuse box...keep this wire and the heavy + lead from the battery attached to the starter, and disconnect the yellow (it ties to a purple/orange resistance wire as well) from the starter and discard (not shown on diagram)
Follow the diagram and you are all set...only two wires and you'll be up and running.
|
First of all, I want to thank you guys.....
when you say disconnect the yellow, that it ties to a purple/orange resistance wire from the starter and discard..??? can you explain alittle more for this wiring dummy????