Re: Matt's 74 Bronco
So after figuring out what direction I had to go to get things started I first started to get the inner fender panel removed.
Pic #1. The inner removed to reveal some small spots to be repaired.
Pic #2. The upper cowl section was rotted so will need to be fixed before I move forward.
Pic #3. Using my trusty poster board for mockup I then transferred it to metal and made the new patch.
Pic #4. Patch all welded in place (I also painted inside the opening with rust encapsulator)
Pic #5. The inner held in place with self tappers and the fender was test fit and measured numerous times.
Next up the kick pan and A-pillar.
Mark...
|