[Montierth]

Originally Posted by geezer#99

You can get a fuel line with filter like this and then run another line from the pump up to the filter.
https://www.tdotperformance.ca/edelb...iABEgID6fD_BwE

You can buy prebuilt lines at the parts store. Ones with the ends flared. Just need to bend them to fit.

Lots of room under the carb on that side especially when you install the heat spacer you’re gonna need. Like this.
https://www.speedwaymotors.com/Moros...y-390,616.html

What do you recommend going from the fuel pump to the edelbrock filter/ fuel line?