I installed the new sport mirrors and the window regulators on the doors and then hung them. I then taped off the tops to install the glass:
I got the Danhard heater tucked into position:
Then it was onto wiring. I love wiring; this is probably my favorite job. It can be tedious sometimes, though:
I looked for a decent dash panel to run the Autometer gauges I bought, but I decided to build my own. So I took some .125” aluminum and cut it out in the shape of the original, then welded a flat strap on the outside to get the original face angle and standoff.
The back wired up:
The front. I like the Sport Comp II; if you squint, it looks like the Chevy bowtie symbol:
Here is where my project went askew. If you look under the console, you can see the placement of the ECM. I had purchased a new wiring harness from PSI which allowed me to put the ECM inside the tub: