The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Advice please: Door dented on the end and not hitting dome light switch

Andy4639 · 11-26-2017, 07:26 PM

On the door problem take the inside door panel off roll the window all the way up and cut a 2x4 to go inside the door that you can either hit with a hammer are barrow a friends hydrolic power pac and push it out.

11-26-2017, 07:26 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Advice please: Door dented on the end and not hitting dome light switch On the door problem take the inside door panel off roll the window all the way up and cut a 2x4 to go inside the door that you can either hit with a hammer are barrow a friends hydrolic power pac and push it out. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.