|
Re: Bed Alignment
I didn't find just a sleeve kit, so I opted to cut my own from stock. I used (2) 1 x 5 x 0.120" for the rear cab, (2) 7/8 x 2.25 x 0.095" for the front cab, and (2) 3/4 x 1.75 x 0.083" for the radiator support/front fender. These dimensions are applicable to C/20, C30, and K series trucks. I sprayed them with a primer before installing.
I was about to install and move on, when I noticed that the left frame rail was more rearward than the right making the right rail more forward at the front as evidenced by the bumper to grill distance.
|