The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Those vent window seals are b!tch to replace, but you can do it with patience and soapy water or silicon spray.

Be sure to leave the old seals and tape in your front yard because that's your absolute right.

__________________
Mike
1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes.
1982 C10 SWB -- sold
1981 C10 Silverado LWB -- sold, but wish I still had it!
1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming.
Retired as a factory automation products salesman.
Worked part-time over the years for an engine builder and a classic car repair shop.
Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

11-19-2019, 12:08 PM	#6153
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,432	Re: Restoring Rusty Those vent window seals are b!tch to replace, but you can do it with patience and soapy water or silicon spray. Be sure to leave the old seals and tape in your front yard because that's your absolute right. __________________ Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! Last edited by MikeB; 11-19-2019 at 12:13 PM.