The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

lo72 · 12-03-2010, 04:07 PM

I measured the taper on the stock spindle and the dropped one. it was about .250 larger on the top. I asked the rep if they measured them . he said no because they fit the ball joint...i knew then i was screwed!

12-03-2010, 04:07 PM	#9
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: Magic Ball Joints from CPP I measured the taper on the stock spindle and the dropped one. it was about .250 larger on the top. I asked the rep if they measured them . he said no because they fit the ball joint...i knew then i was screwed!