Quote:
Originally Posted by lo72
The solution to the problem is that to use these spindles you must use MOOG ball joints. Mario from CPP is going to get with Western to see why you can't use any balljoint ie Advance brand. The problem lies in the upper balljoint taper and Moog is the only ball joint that will fit. i won't be able to put them on till after the holidays to be sure, but hand fitting them they seem to fit better than the others i tried. So we will see! lolife99 they sent the same spindles back to me and sent two moog joints..the tierod ends fit the taper as they should they were for a 85 c-10 the taper is off somewhat
|
So you're saying that if I order a set of 73-87 Western Chassis spindles,... I
have to change the upper balljoint to a new set of Moog balljoints,... even if my balljoints are fine.
That in itself would keep me from buying Western Chassis/CPP spindles.
Especially if I just purchased a set of new tubular a-arms and then had to buy another set of balljoints.
Something still doesn't sound right to me.