The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67-72 Gauge Panel Removal

krue · 07-15-2005, 08:07 PM

5. While you are under the dash, disconnect the speedo cable (you can almost make it out in the first pic.

6. Disconnect the oil pressure line (if so equipped), unplug the wiring harness from the gauge panel. You may also want to remove the bulbs from the top of the panel (turn signal indicator lights) to make it a little easier to remove the panel.

07-15-2005, 08:07 PM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	5. While you are under the dash, disconnect the speedo cable (you can almost make it out in the first pic. 6. Disconnect the oil pressure line (if so equipped), unplug the wiring harness from the gauge panel. You may also want to remove the bulbs from the top of the panel (turn signal indicator lights) to make it a little easier to remove the panel. Attached Images __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"