The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

sbc421 · 11-29-2005, 01:17 AM

Here is my setup... Tire size is 31/16.50/15 Mickey Thompson ET Streets on 15" x 12" Weld Draglite wheels with 7.5"s of back-spacing. (NO these wheels will not fit on your stock truck, however they will if you change out your axles, I went with 35 Spline Moser's) Weld Draglites only come in 5 on 4.5 or 5 on 4.75 bolt circles. I have also included a couple of pics of my trailing arm modification... I have added the ability to adjust my trailing arms up or down in the front to suit my traction needs.

11-29-2005, 01:17 AM	#78
sbc421 Registered User Join Date: Jul 2002 Location: La Porte, TX Posts: 24	Re: Wheel/Tire Fitment Pictures & Info Here is my setup... Tire size is 31/16.50/15 Mickey Thompson ET Streets on 15" x 12" Weld Draglite wheels with 7.5"s of back-spacing. (NO these wheels will not fit on your stock truck, however they will if you change out your axles, I went with 35 Spline Moser's) Weld Draglites only come in 5 on 4.5 or 5 on 4.75 bolt circles. I have also included a couple of pics of my trailing arm modification... I have added the ability to adjust my trailing arms up or down in the front to suit my traction needs. Attached Images __________________ 1970 Model C10 LWB, Small Block 421 CID, AFR 220 Heads, 1050 Dominator, Super Victor Intake, Comp Cams Mech Roller, Comp Cams ProMagnum Roller Rockers, 13.8:1 Compression, 4500 RPM TCI Converter, TH400 TCI Transmission w/reverse manual valve body w/trans brake, 5.13 Rear Gear on a full Spool, 31-16.50-15 Mickey Thompson ET Streets