|
Re: No start after working on power windows
Seeing how bad the + wires on the junction box in post4 pic3 I would clean all your + and your -Ground to body area contacts I bet you will see a big improvement batt power your truck.
They sell one of the box store in your area like pet boys wiring fix section a wire to wire connection from one size to another size one name brand standard step down but connectors (maybe STP385 OR STP386 But they sell them a box of 10's and heat shrinkable tube in 7.9 (5/16") x 75mm or 9.5 (3/8")x75mm in red or black make sure on the wire be for you crimp you can use a little bit liquid electric tape on the end after you slide in to place the shrink there it a water tight seal heat gun work best.
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|