[mongocanfly]

Since I swapped in the. NV4500 in place of the old IH trans I had to do something with the e-brake/4x4/4low-hi levers....on the IH all this bolted to the side of the trans.....so I fabbed up a bracket to mount all this on...I welded it to the trans crossmember and added a brace off the frame...the nv is a wider trans as well so that moved all the levers over about 2in to the pass side.....so I had to make some modified linkage as well...got it all fabbed up and works great..will pull and pain't it all and thatll be another check mark on the list....