02-17-2015, 06:07 PM
|
#102
|
|
Registered User
Join Date: Apr 2007
Location: pasadena,TEXAS
Posts: 880
|
Re: My 4/6" ECE lowering install thread - 72 Shorty
Quote:
Originally Posted by Ekliptix
The alignment of the panhard bar was easy. I installed it, measured the distance from the rear drum to the fender on each side, it wasn't even so I adjusted the panhard bar via the threads that make up its ends until the rear axle was centered.
For shocks I'm using the ones included in the ECE kit, KYB shocks. They are ok but if they had an upgrade option for the shocks, I'd get them.
|
From the way it looks the panhard has to be unbolted to adjust it how did you move the truck over for the adjustment ?
__________________
1971 Cheyenne SWB 402BB, 700R4, 3.73 posi, PS, PB, A/C, Tilt, Tach
"Wanda"
Don't argue with idiots, People watching may not be able to tell the difference...
There's someone in my head........But it's not me......
cheap tricks thread great info here!! http://67-72chevytrucks.com/vboard/s...d.php?t=489394
|
|
|