Quote:
Originally Posted by Mondo
Not the most elegant but with a tonneau cover no one sees it and it's out of the way... just drop the tailgate, don't have to mess with the cover.
|
Thats the way I did mine also. I had an exhaust shop bend a piece of pipe for under $20 and welded the vent into. I unsoldered the stock valve piece (under the gas cap) and had the new pipe swedged for it. The tank fills wide open now but does have a tendancy to burp when the pump cuts off. I looked into the marker light setup on the fleet side and figured out there was not enough room without modding the inside of the box. Eventually I will make an enclosure so the filer looks almost factory on the inside. I really like the 31 gallon tank and extra traction.