|
Re: what is your cam's overlap degree?!
Quote:
Originally Posted by SilverMachine
Yeah. I've done a lot to the truck to get it ready for this. 3.73 gears with positraction diff..new torque converter higher stall of course, aluminum heads. The compression will be probably the middle of the road 9:5 or so with 64cc chambers and .0015 felpro 1094 gaskets. I hope this works out! I want it to be beefy but maintain decent performance at the same time!
|
That cam would do worlds better with about a 10:1 static comp ratio. IMHO, 9.5 is low with aluminum heads also.
__________________
87 R30 CC Dually, TBI 454, NV4500, zero rust barn find
87 Jeep Grand Wagoneer, 6.5 turbodiesel, 700R4
|