View Single Post
Old 06-28-2004, 01:43 AM   #8
ante_up13
Registered User
 
Join Date: May 2004
Location: Here
Posts: 167
What you will do is position the shaft with seals on it inside the a -arm...then you will thread the shaft into each bushing...the bushings are screwed in from the outside...the bushings are not threaded on the outside but have ridges and will give you some trouble probably as it gave me...they are however threaded on the inside...just take your time and work them in as hard as you can...it seems impossible while you are doing it...but it will happen just give it time
ante_up13 is offline   Reply With Quote