The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Spring Swap Thread

'63GENIII · 06-04-2017, 06:42 PM

Back to one of the main reasons that I wanted to pull the axle - the springs. I had a crack in a drivers side leaf, they were a little soft and wait, I just found a little crack in one of the passenger side leafs as well

.

So far, not so fun. I'll probably use a few leafs from the original '63 rear spring packs to mix / match and make two 7 leaf packs.

06-04-2017, 06:42 PM	#176
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Spring Swap Thread - 1963 K15 Back to one of the main reasons that I wanted to pull the axle - the springs. I had a crack in a drivers side leaf, they were a little soft and wait, I just found a little crack in one of the passenger side leafs as well . So far, not so fun. I'll probably use a few leafs from the original '63 rear spring packs to mix / match and make two 7 leaf packs. Attached Images __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29