[FAKKY]

I have been chasing down a lack of power to my new ididt column front left turn signal.

I think its a problem with the column - unless there is some trickery I don't understand.

Using a powerprobe.

With key on ign I have power to Purple (Turn Signal Feed) at connector L

When i select Right turn signal - I have power at back of wires of the ididit column plug (for right F and right read - Green[N] and Royal Blue [J])

When I select no turn signal there is no power.
When I select hazard my dash lights and rear lights up correctly.

But.
When I select left turn signal
I have power at back of ididit column plug connector M (yellow left rear) but have NO power at connector H (light blue left front turn).

seems to me like an issue with that circuit internally ....