Quote:
Originally Posted by joedoh
ahhh brand new tires on a project is my favorite look
|
Thanks - new - but been sitting for almost 3 years lol
Should have bought some rollers first.
Quote:
Originally Posted by 84blaze
Quick tip: If you're wiring with stripped wire ends like that also remember to wrap the wires around the stud clockwise so when you tighten the nut it helps wrap the wires around the stud rather than pushing them off.  |
Good tip. That was just a mockup to see her start ..... all my wires are shrink wrapped with terminal ends.
I am thinking to join the cable to the actuator ....
https://www.swingsetmall.com/stainle...double-clevis/
Have the larger side clevis pin through the actuator.
Wrap the cable wire around the smaller clevis and clamp with ferrule/sleeve.
https://www.e-rigging.com/How-to-Sel...-Swage-Sleeves
See any issues ?