Quote:
Originally Posted by Zoomin
Joe, I took your advice and ground the heads off. Wasn't easy peasy because there was always something in the way and being on the bottom of the frame I was treated to spark showers. I also learned why you recommended a long sleeve shirt too.
I had better luck drilling a small hole in the center of the rivet then going after it with a step bit after that. Then I just knocked the bracket off with a BFH.
Anyway, all those rat bastard rivets are off there now.
Next up is to grind the crust off the axle and get it painted and hang the brackets.
|
good workaround! I dont have a drill that will drill past the 4th step on a step bit haha.