Quote:
Originally Posted by Captainfab
How does the bore of the master you are using compare to the 2006 C3500 master? I would have used a booster, master and prop valve for the 2006 C3500. You could use the booster bracket you bought from me with an auto trans or simply purchase the booster bracket that I make for the '60-'62's with an auto trans. When you bled the brakes did you use the tool to hold the prop valve in center so it didn't slide one way and block off one circuit?
|
I don’t know how it compares to the master on the 3500. All I had and used was the rear end. I did not use that tool to hold the prop valve in the center. I’ll have to take those lines apart and set that back in the center, next time a get a chance to work on it. I didn’t want to hack your bracket because I figured I can use it on something else later, plus I didn’t want the clutch master going to waste.