[mr.chevy]

1/2 Ton now.

Aug 1 2010
Well as you all know my good truck is a 3/4 ton or at this stage was a 3/4 ton. So my updates are that I converted the front end to a 1/2 ton 6 lug with drums, since my disc conversion didn't work out as well as I planned. So I am going to have to wait until I have more funds to be able to buy the kit from CPP. Anyway i still have to convert the steering linkage over so that is why its not all together in the picture.

Yes my shop is now pretty messy, with all the extra truck parts all over the place. Anyway to update you all on my frame here are some current pics. I don't think there is anything left on it that I still need to take off. I just need to cut the 12" sections in the middle and 8" in the back and then weld it all back together. I am moving the rear cab mounts back right now but I didn't have a big enough drill bit for it. I have drilled the pilot holes though and removed the cab mounts. Oh I also removed the the front end and that will be sand blasted at the same time as the frame.