[jhama78]

Originally Posted by Druman

I was told that someone on eBay(lug king) or something like that is selling a 3.75 size bore. If you buy those all you will have to do is open the rims bore a little no relief cutting or bending involved. I hope this helps.
Later
DRU

Here's something just for reference, if ya want me to delete it to prevent from junking up your post then I will.

http://www.ebay.com/itm/300982627475...84.m1423.l2649

THE LUGNUTKING GROUP PRESENTS:

THE NEW AWSONE BULLET CENTER CAPS WITH A 3.45" OUTSIDE DIAMETER AND 4.5"HEIGHT WHICH WILL WORK ON THE OLD 5 0N 5 1/2 BOLT PATTERN STEEL WHEELS. MOST OF THESE WHEELS ARE ON OLD F-150 OR F-100 5 LUG FORD TRUCK

!!!!!!!!!!!!! WARNING, THESE CAPS WILL FIT SOME 6 LUG CHEVY OR GMC TRUCK. THERE ARE 6 LUG CHEVY OR GMC WHEELS WITH 3 1/2 CENTER HOLE DIAMETER AND THESE CAPS WILL FIT.

BEFORE YOU BUY THESE BULLET CAPS FOR A 6 LUG NUTS CHEVY WHEELS, MEASURE THE DIAMETER OF THE CENTER HOLE


THIS AUCTION CONSIST OF 4 BULLET CENTER CHROME CAPS

THESE CAPS ARE MADE OF STEEL AND NICELY CHROME PLATED

THE BULLET CAPS HAVE :

-3.45"" OUTSIDE DIAMETER

THE TOTAL HEIGHT IS 4 1/2"

THESE BULLET CAPS WILL SLIDE FROM THE BACK OF THE WHEEL.

THESE BULLET CAPS WILL FIT ANY WHEEL WITH A 3 1/2 BORE CENTER.