Re: #corona10truck - 77 C-10, pancaked crossmember - z'd frame etc etc etc
Quote:
Originally Posted by chevy3100truck
Z'ing the frame raises the steering and the suspension, but raising the steering the additional 1 1/4" was due to the crossmember pancake. The drag link was hitting the lower control arms at full droop.
I know some people seem to have success with a 1 1/2" crossmember drop and stock steering, but when I cycled everything through full travel I was having interference.
|
Gotcha. You raised the steering in addition to the amount it was raised w/the 'Z'.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|