Quote:
Originally Posted by 66-PMD-GMC
I used a cross member for a trans under the balancer, left the top bolts on the motor mount perches and the motor mounts bloted up so the motor wouldn't tip over.
I unbolted the lower bolts for the perches that attach to the cross member.
After pulling everything out I found out all I had to do was swap A arms with spindals and rotors... etc....
3/4 to 3/4 is a direct swap.
|
Thanks.
From the threads I've read, I had just figured I'd swap the whole front cross member. But your post got me thinking; I searched the forums and found a couple threads on the subject:
http://67-72chevytrucks.com/vboard/s...d.php?t=384196
http://67-72chevytrucks.com/vboard/s...d.php?t=357610