Working to get my body jig completed
Main rails frame assembly actually setting up on edge
This will lay down flat and attach to the cross members
on the body mount holes
Cross members...one at the front floor, one in the middle, and one at the rear
all are adjustable with all thread and nuts
One of the main uprights nearly finished.....got to drill some holes up the side of the vertical tube for adjusting up and down.
Here's the rough design...doesn't show the cross members but they will weld to the main frame rails on some standoffs to allow me to
1. keep the body straight and square
2. turn it upside down for easier access to work on the underside.
