|
Re: Floor to column shifter
So, yesterday I pressed in with the conversion. Bought a $40 kit from the truck and car shop in orange and started the installation. Luckily all the tabs for the 3 speed manual were still on the steering column and they never filled the shifter hole. The kit for converting had a rod that was too short. Bought a piece of steel rod and a hardware store $4 and cut and welded on the threads from the rod in the kit. A couple of other little bends and about an hour later i had it done. It took longer to remove the old shifter out of the cab than it did to make the conversion! Stoked! I know guys think a floor shifter is better but I prefer the more stock look to the truck and it frees up space so the old lady slide over next to me while cruising!!
Posted via Mobile Device
Posted via Mobile Device
|