The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - And so it begins.... 65 shortbed, lay frame, LT engine build

HSRACER · 05-13-2019, 07:15 PM

Started on the engine wiring today and got most of it laid out the way I wanted. I will be using the vintage air control to cycle the compressor, the Dakota digital gauges will run off the BIM module connected to the OBD port, and the fuel system will be controlled by the main computer and the fuel control module.

Also took the measurements I needed to get the one piece driveshaft built at a local place. They called me at 4:15 today and said it was done. I just dropped off the yoke at 10am this morning!

Also put the front shocks back on and tomorrow I will reinstall the rack and pinion steering.

I will order a Tahoe fuel pump tonight so I can mock it up in the Boyd’s tank.

05-13-2019, 07:15 PM	#38
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: And so it begins.... 65 shortbed, lay frame, LT engine build Started on the engine wiring today and got most of it laid out the way I wanted. I will be using the vintage air control to cycle the compressor, the Dakota digital gauges will run off the BIM module connected to the OBD port, and the fuel system will be controlled by the main computer and the fuel control module. Also took the measurements I needed to get the one piece driveshaft built at a local place. They called me at 4:15 today and said it was done. I just dropped off the yoke at 10am this morning! Also put the front shocks back on and tomorrow I will reinstall the rack and pinion steering. I will order a Tahoe fuel pump tonight so I can mock it up in the Boyd’s tank. Attached Images __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS