The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72chevynoob · 10-26-2012, 10:30 PM

All done! I purchased a deadmans valve from princess auto, along with a 15foot air line for my blast line, and two 3/8" x 1/4" bushings to connect the air line to the 'T' fitting on the bottom of the tank and to the nozzle. I welded three pieces of rod onto the base for a stand for now. The sway bar is after about 30 seconds to 1 minute of blasting.

10-26-2012, 10:30 PM	#33
72chevynoob Registered User Join Date: Mar 2012 Location: Lacombe, Alberta Posts: 288	Re: home made shop tools etc? All done! I purchased a deadmans valve from princess auto, along with a 15foot air line for my blast line, and two 3/8" x 1/4" bushings to connect the air line to the 'T' fitting on the bottom of the tank and to the nozzle. I welded three pieces of rod onto the base for a stand for now. The sway bar is after about 30 seconds to 1 minute of blasting. Attached Images Last edited by ETsC10; 11-06-2012 at 10:16 AM.