Quote:
Originally Posted by RedRoad
Were both drive shafts (both the small female end and the long tube) on both the front and rear painted red oxide matching the transfer case or left raw? Most paint them black but Id rather follow what is factory.
For the front and rear axles and springs, were they also painted black from the factory? Only the rear diff cover shows any evidence of black paint.
Thanks for any info
|
Drive shafts were either raw or chassis black. There was no place on the line where red oxide was sprayed after the chassis was assembled.
Front springs, rear axles and springs were drizzled with chassis black in a small booth right before body drop. "Painted" is a bit generous, as it was not a full bodied "spray" but more of a drizzle in the general direction of the chassis, using the cheapest black paint that you can imagine. The amount of coverage was hit and/or miss at best.
K