|
Re: Not Another Rebuild Thread....
So then came Friday...
I had no clue the metal that is the back of the cab was so thin.
Pic #1 is the upper fuel tank strap anchor points.
#2 is after I air chiseled one off and cut the crap out of the backside of my cab.
#3 is what it looks like from the outside after I polished it up for a better look.
I should have either left them alone, or just cut the threaded part off like I did on the d-side. They are going to be covered with sound deadner anyways, but now the back side of my cab needs repair.
#4 is what looks like an old CB atenna mounting hole in the dead center of the top of my cab grrrrrrrrrrrrrr
Time to learn how to weld this stuff up I guess....
|