|
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build
sid, is this what you needed on the cross sills for bed on the frame? The measurements are taken from pass side, all numbers are to center, measured off back of frame.
I don't know why the second set of numbers aren't identical to the first set. I could remeasure if need. but if you subtract the difference on the first and last hole of the first "3" set of holes its 4.5" difference on the "3" set of holes toward the cab the difference is 4.357" so between the first set and second set of holes its off by .125 which is 1/8 inch which could realistically be 1/16 off per hole on each measurement.
anyway, sorry for the rant. not even sure if thats what you need. let me know
the middle hole on the last set is 18 1/2" I know it kind looks like a 19
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481
49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA
Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162
52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame
Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!
www.coffeeandcustoms.com
|