The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

b454rat · 09-19-2020, 08:24 AM

Offroaddesign.com can modify the tail housing of the 205 for VSS. Or if your steady with grinder or just happen to have a milling machine, then can do it yourself. The parts come from an NP241, the tone wheel is slightly different, being the 205 version is thicker, but will work. ORD even says there the same lol. But if using a 2wd trans and the VSS on the rear of the tranny, and have no t-case, 1, 2, or 12 t-cases behind it, and if all in 2wd, then the trans should shift like stock. Putting it in low will change the shift points.

09-19-2020, 08:24 AM	#15
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,453	Re: 4L80 damaged Offroaddesign.com can modify the tail housing of the 205 for VSS. Or if your steady with grinder or just happen to have a milling machine, then can do it yourself. The parts come from an NP241, the tone wheel is slightly different, being the 205 version is thicker, but will work. ORD even says there the same lol. But if using a 2wd trans and the VSS on the rear of the tranny, and have no t-case, 1, 2, or 12 t-cases behind it, and if all in 2wd, then the trans should shift like stock. Putting it in low will change the shift points.