The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**aotte1** · 09-15-2015, 10:17 PM

More photos of tacked adapter plate. The steering gear box is now bolted to the frame through adapter plate. Will fully weld AP to frame later. The last photo in this set shows the position well relative to the frame.

Note: Have rust free AZ steering box and linkage that will be used in final set-up, however, used this all from one truck stuff to see how it all fits together for alignment, as it was a working driving truck.

Les

09-15-2015, 10:17 PM	#73
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 64' K10 Project Long Bed More photos of tacked adapter plate. The steering gear box is now bolted to the frame through adapter plate. Will fully weld AP to frame later. The last photo in this set shows the position well relative to the frame. Note: Have rust free AZ steering box and linkage that will be used in final set-up, however, used this all from one truck stuff to see how it all fits together for alignment, as it was a working driving truck. Les Attached Images Last edited by aotte1; 09-15-2015 at 11:09 PM.