The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - budget beater c10 to k30 swap over build.

sweetk30 · 09-07-2018, 12:34 PM

getting stuff done on this SUPER NICE day with good shop doors open temps .

left brace top front 1st & 2nd hole in frame already . just mark drill 3rd and 2 bottom for 3/8" bolts .

right brace top 1st hole only in frame already . mark and drill the rest top and lower .

note lowers might be fun if no real lift springs or stock . i still have to undo the front yet 1 last time so i will drill those holes when springs are out .

09-07-2018, 12:34 PM	#59
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: budget beater c10 to k30 swap over build. getting stuff done on this SUPER NICE day with good shop doors open temps . left brace top front 1st & 2nd hole in frame already . just mark drill 3rd and 2 bottom for 3/8" bolts . right brace top 1st hole only in frame already . mark and drill the rest top and lower . note lowers might be fun if no real lift springs or stock . i still have to undo the front yet 1 last time so i will drill those holes when springs are out . Attached Images __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.