The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - budget beater c10 to k30 swap over build.

sweetk30 · 10-09-2018, 06:56 PM

fuel system got a lot closer to being done today .

2 new 20 gal tanks wiped down / scotchbrighted / wiped again / then 2 good coats of transtar undercoat sealer . this stuff hardens up a good bit unlike other brands that stay gooy .the TWIN'S and holding the tanks up outside .

then my redhorse AN fittings come in . converts from o-ring seal AN to quick connect nylon style like the o.e.m have used for years now . 3/8" feed and 5/16" return .

i have the kit to make my own lines . and its fairly easy to do .

10-09-2018, 06:56 PM	#73
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: budget beater c10 to k30 swap over build. fuel system got a lot closer to being done today . 2 new 20 gal tanks wiped down / scotchbrighted / wiped again / then 2 good coats of transtar undercoat sealer . this stuff hardens up a good bit unlike other brands that stay gooy .the TWIN'S and holding the tanks up outside . then my redhorse AN fittings come in . converts from o-ring seal AN to quick connect nylon style like the o.e.m have used for years now . 3/8" feed and 5/16" return . i have the kit to make my own lines . and its fairly easy to do . Attached Images __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.