The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

shifty · 08-31-2009, 12:41 AM

Need you to be more specific. Auto or manual trans?

Also, seriously...think about the time and frustration you've dumped into it already. Why not send your harness to Speartech (http://www.speartech.com/) and have them rework it for you? What you get is something (usually) better-than-home-hacked with zero effort on your part. There are cheaper ways to do it, but ... This is pretty much one of the best, albeit pricey, methods.

If you really insist on doing it on your own, LS1tech is one of your best resources.

http://www.ls1tech.com/forums/conver...-diagrams.html

You'll need to sign up. I'm over there, my username is almost the same over there, only there's a ` at the end (shifty`)

08-31-2009, 12:41 AM	#6
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: 5.3 SWAP Wiring Problem Need you to be more specific. Auto or manual trans? Also, seriously...think about the time and frustration you've dumped into it already. Why not send your harness to Speartech (http://www.speartech.com/) and have them rework it for you? What you get is something (usually) better-than-home-hacked with zero effort on your part. There are cheaper ways to do it, but ... This is pretty much one of the best, albeit pricey, methods. If you really insist on doing it on your own, LS1tech is one of your best resources. http://www.ls1tech.com/forums/conver...-diagrams.html You'll need to sign up. I'm over there, my username is almost the same over there, only there's a ` at the end (shifty`) __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.